7. Reinstall the three screws. Torque to specification.
TORQUE
5 ft-lbs (7 Nm)
8. Reinstall the external air box cover and screws. Torque to
specification.
TORQUE
7.4 ft-lbs (10 Nm)
NOTICE
A loose fitting cover or improperly installed filter element may
allow debris to enter the engine which may cause premature
engine wear.
RREEAARR DDRRIIVVEE BBEELLTT CCLLEEAANNIINNGG
Cleaning the drive belt will maximize belt and sprocket life and
minimize drive line noise. Clean the belt at every tire change.
Clean the belt more often if riding in dirty, dusty or high debris
environments.
1. Mix a few drops of mild dish soap with a cup of warm water.
2. Use a soft nylon brush to clean the belt and sprocket teeth with
the soapy water. Clean well in corner areas where road debris
and belt dust can collect.
3. Rinse the belt with clear water, then dry thoroughly.
TIP
Do not inspect or adjust drive belt tension when the belt or drive
system is wet or hot. Improper adjustment will result.
96
Summary of Contents for Chief Dark Horse 2019
