Check the work area door for ease of movement. To do this, press the
emergency stop button and manually open and close the work area door. If the
work area door can be moved only with effort, determine the cause. Possible
causes are defective or improperly adjusted wipers, or chips on the guide bar or
in the guide rollers of the work area door.
7.
Danger
Pinching of limbs due to faulty obstacle detection on the
work area door
Check obstacle detection.
INDEX recommends an annual check of the obstacle detection
function of the automatic work area door.
The test should only be carried out with a suitable aid, such as a
rectangular strip or a softwood squared timber.
INDEX recommends documenting the results of the inspection
and keeping them at the workplace.
The machine must be switched on and fully functional for this
test.
Example: Checking the obstacle detection
Check obstacle detection of the automatic work area door. During the obstacle
detection test, a rectangular strip or softwood squared lumber, for example, is
held in the travel path of the work area door during the closing process. If the
rectangular strip or squared timber comes into contact with the work area door
Maintenance Summary - 2.000 Operating hours
57
Maintenance Instructions
G300.2 G320.2 G400.2 G420 G500.2 G520
DIE147EN - 17.08.2022