manualshive.com logo in svg

Index G300.2, Operating Instructions And Maintenance Instructions, Page: 62 / 154

Share
Download
Index G300.2 Operating Instructions And Maintenance Instructions Download Page 62

2.

Clean the outer pane with a soft cloth or sponge and glass

cleaner or soap and water. Do not use abrasive or alkaline

cleaners (e.g., benzene, acetone or carbon tetrachloride) and no

sharp tools or sharp objects (such as razor blades or

screwdrivers).

Clean outer pane.

3. Clean inner pane.

4.

Example: Safety label – window pane 2006

1

Year of manufacture

2

Protection class and EN standard

3

Manufacturer

4

INDEX part number

Check safety label (replacement interval every 8 years).

5. Check wipers. Remove and clean the wipers. If the wipers are severely

deformed or damaged, they must be replaced. To clean the door panels evenly,

be sure to reinstall the wipers after their removal aligned in parallel and ensure

that they snugly contact the work area door.

6.

Example: View of the automatic work area door with drive

Maintenance Summary - 2.000 Operating hours

56

Maintenance Instructions

G300.2 G320.2 G400.2 G420 G500.2 G520

DIE147EN - 17.08.2022

Summary of Contents for G300.2



























































































































































Reviews:

No comments