Example: G420_work area door (Fig.:_1)
a
Outer pane (design pane made of PMMA – polymethyl methacrylate)
m
Center pane (polycarbonate)
i
Inner pane (glass)
s
Silicone gasket
If sealing compounds from other manufacturers are used, their
equivalence must be guaranteed by the supplier or manufacturer in
writing.
When mounting and dismounting the front cover/design pane using a
crane, INDEX recommends using suitable suction lifters to secure it.
To ensure safe handling, both the suction surfaces of the suction
lifters used and the corresponding areas of the design pane must be
carefully cleaned beforehand.
Personal protective equipment -> Use gloves with rubberized palm/
inside.
Determine and prepare the storage location for the design pane. To
prevent scratching of the design pane, cover the surface at the
storage location with suitable tarpaulins, foils, felt mats or similar.
Under certain circumstances, the design pane can also remain on the
crane near the ground. Shut down and secure the crane and seal off
or secure the surrounding area.
Maintenance Summary - 8 Years
141
Maintenance Instructions
G300.2 G320.2 G400.2 G420 G500.2 G520
DIE147EN - 17.08.2022