background image

FGR-ST-DL210A Fingerprint Door Lock
Deadbolt User Manual V4.0

6. Registering or Enrolling Fingerprints

Access to Exterior and Interior lock portion are needed

Exterior Side - 

slide up the dust cover and push the 

“Power On”

button and to scan your fingerprints.

Interior Side -

you will be using the 

STOR, DEL

and  

(Select)

buttons.

A. In order to register or enroll a user fingerprints, you will be operating buttons on the interior

portion and using the scanning window on the Exterior portion, thus both sides of the lock will
be used. Please familiarize yourself with the location of buttons as shown in these pictures,
as well as the sequence of operations, in order for you to more easily accomplish the
registration without being "timed out". 

B.

For the first two registrations, there is no need to assign management levels as they
will be Administrators automatically

, but on subsequent registrations, have in mind what

authorization level you wish to assign and the range of template ID numbers defining the
levels. Make sure your selection is correct using the form provided.

Guardian DL210A Operation Manual V4.0                      © Copyright 2004 Index Security Inc.

9

Index

Access

Exterior

portion

Interior

portion

Power
Button

Summary of Contents for FGR-ST-DL210A
























Reviews: