FGR-ST-DL210A Fingerprint Door Lock
Deadbolt User Manual V4.0
I.
If 3 beeps sound, the registration was not successful. You can immediately press
STOR
until
a long beep (about 3 seconds) and try again to scan your fingerprint. However, if the power
has “Timed Out” and you hear the motor sound; then you must start over.
J.
After a successful registration, you can immediately register another person by pressing
STOR
for about 3 seconds again , or if Timed Out, start over.
K. After registrations, wait about 10 seconds for the lock to Time Out before trying to test the
fingerprint access system.
8. Deleting Fingerprints
Mass Delete with only two Administrators registered
A. While holding the
DEL
button, press the
Power
button and hold
B. Listen for long beep followed by two beeps. Display will show
UU
.
Mass Delete with more than two fingerprints registered
A. One of the Administrators must first perform an unlocking procedure
B. Immediately after the Administrator is successfully verified, press the
Select
button once and
release, then press both
DEL
and
STOR
buttons simultaneously for about 3 seconds. Display
will show
UU
.
Deleting individual fingerprints
A. Administrators can delete anyone. Supervisors can delete IDs on the User level. Users
cannot delete.
B. The Administrator or Supervisor must know the template ID number of the person being
deleted.
C. The Administrator or Supervisor first verifies his/her fingerprint and unlocks the lock.
D. Quickly (before time out) press
DEL
button for about 3 seconds until you hear a long beep.
E. Press
the
Select
button repeatedly until the template ID of the person being deleted is
displayed.
F. Press
the
DEL
button again for about 3 seconds until the long beep.
G. That individual has been deleted.
Guardian DL210A Operation Manual V4.0 © Copyright 2004 Index Security Inc.
13
Index
Access
Power
Button
