22
GB
M
aintenance
an
d
care
Switching
the
appliance
o
ff
D
isconnect your appliance from the electricity supply
before carrying out any work on it.
C
lea
n
i
n
g
t
h
e
a
pp
l
i
a
n
c
e
Never use steam cleaners or pressure cleaners on
the appliance.
The stainless-steel or enamel-coated external parts
as well as the rubber seals may be cleaned using a
sponge that has been soaked in lukewarm water
and neutral soap. If these stains are difficult to
remove, use only specialised products. After
cleaning, rinse and dry thoroughly.
D
o not use
abrasive powders or corrosive substances.
Ideally, the inside of the oven should be cleaned
after each use, when it is still lukewarm. Use hot
water and detergent, rinse and dry with a soft cloth.
D
o not use abrasive products.
The accessories can be washed like everyday
crockery (even in your dishwasher).
C
lea
n
i
n
g
t
h
e
o
v
e
n
d
oo
r
Clean the glass part of the oven door using a sponge
and a non-abrasive cleaning product, then dry
thoroughly with a soft cloth.
D
o not use rough abrasive
material or sharp metal scrapers as these could
scratch the surface and cause the glass to crack.
To
clean more thoroughly, you can remove the oven door.
1. Open the oven door fully (
see diagram
)
2. Lift up and turn the small levers located on the two
hinges (
see diagram
)
3. Grip the door on the two
external sides and close it
approximately half way. Then
pull the door towards you lifting
it out of its seat (
see diagram
).
To replace the door, reverse
this sequence.
I
n
s
pec
t
in
g
t
h
e
s
e
a
l
s
Check the door seals around the oven periodically. If
the seals are damaged, please contact your nearest
After-sales Service Centre (
see Assistance
).
W
e
recommend not using the oven until the seals have
been replaced.
R
e
p
la
c
i
n
g
t
h
e
l
i
gh
t
b
u
l
b
To replace the
oven light bulb:
1. Remove the glass cover using a screwdriver.
2. Remove the light bulb and replace it with a similar
one:
W
attage 15
W
, cap E 14.
Replace the glass cover, making sure the seal is
positioned correctly (
see diagram
).
A
u
t
o
m
at
i
c c
lea
n
i
n
g u
s
i
n
g
t
h
e
F
A
S
T
CLE
A
N
f
u
n
c
t
io
n
W
ith the FAST CLEAN mode, the internal temperature
of the oven reaches 500°C. The pyrolytic cycle is
activated, burning away food and grime residues.
D
irt
is literally incinerated.
Keep children away from the appliance during the
automatic cleaning cycle as surfaces may become
very hot. Particles may ignite inside the oven due to
the combustion process. There is no cause for
concern: this process is both normal and hazard-free.
Before initiating the FAST CLEAN mode:
Remove large or coarse food residues from inside of
the oven using a damp sponge.
D
o not use
detergents.
Remove all accessories.
D
o not place tea towels or pot holders over the oven
handle.
!
If the oven is too hot, the pyrolytic cycle may not
start.
W
ait for the oven to cool down.
!
The programme may only be started once the oven
door has been closed.
Glass door
Seal
Lamp
Oven
compartment
