Indemnis Nexus i2 PRS, Operation Manual

Page: 9 / 30

9 9
N E X U S | E Q U I P M E N T O P E R AT I O N S G U I D E - V 1 . 5
HOW TO CHARGE YOUR NEXUS
|
CHARGING
Charging your Nexus i2 PRS
The Nexus i2 PRS must be charged before use. It uses a USB-C cable to charge the unit and can be charged with any standard USB charger.
The battery charge status can be indicated by pressing the power button once. A fully charged battery is indicated by a fully lit green LED ring.
The battery percentage can also be viewed on the Nexus MTD, the Nexus i2 PRS will not allow for operation below 33% battery life.
Note - The Nexus i2 PRS harvests power from the aircraft which will keep the battery fully charged, as long as the Nexus i2 PRS is
plugged in and the Inspire 2 turned on. If the Nexus i2 PRS is not fully charged users may experience a long wait once plugged into the
Inspire 2, as the unit is required to charge before the Nexus i2 PRS will allow the user to Pre-Arm the unit.
USB charging cable inserted into the USB port Power Button (left) and red Arming Button (right)