Indemnis Nexus i2 PRS, Operation Manual

Page: 28 / 30

28 28
N E X U S | E Q U I P M E N T O P E R AT I O N S G U I D E - V 1 . 5
ON GROUND WARNING
CAUSE This error indicates that the Nexus i2 PRS has lost contact with the ATS.
SOLUTION Generally this is due to a loose connection in the USB harness. Check USB-C and USB-A
connections are secure, power cycle the unit. If error persists, contact Indemnis. 1-84-INDEMNIS
MID FLIGHT WARNING
CAUSE This error indicates the Nexus i2 PRS has lost contact with the ATS. If this happens mid-flight, this
represents a serious error that requires landing. *If the unit has ascended above the altitude lockout, manual
deployment is enabled until the Nexus unit is disarmed.
SOLUTION Land immediately and handle with caution and disarm unit either manually or from the Nexus MTD.
CDS FAILURE WARNING
CAUSE This is an internal error of the Nexus i2 PRS, and indicates the unit needs to be serviced.
SOLUTION Do not operate further, keep unit in it’s case and in a safe location. Contact Indemnis
1-84-INDEMNIS to send in for service.
USB CABLE UNPLUGGED WARNING
CAUSE Loose or unsecured connection in the USB harness.
SOLUTION Check USB-C and USB-A connections are secure, Power Cycle Nexus i2 PRS.
LOW BATTERY WARNING
CAUSE The independent battery on the Nexus i2 PRS is depleted and needs charging.
SOLUTION Land the UAV, power off the Nexus i2 PRS, and charge with USB-C charger.
TROUBLESHOOTING
|
UNDERSTANDING THE
WARNINGS AND ICONS