background image

2

3

INDEX

1.  Important Information and Warning 

3

2.  Commissioning Check List 

9

3.  Erection  &  Commissioning 

10                    

4.  Safe Operating Procedure 

13

5.  Assembly & List of Spare parts 

14

6.  User information Hoist & Trolley Brake 

34

7.  Wiring Diagrams & List of Electrical Spares 

40

Important Information and Warnings

Terms and Summary

This manual provides important information for personnel involved with the installation, operation 

and maintenance of this product. Although you may be familiar with this or similar equipment, 

it is strongly recommended that you read this manual before installing, operating or maintaining 

the product.

Danger, Warning, Caution and Notice - 

Throughout this manual there are steps and procedures 

that can present hazardous situations. The following signal words are used to identify the degree 

or level of hazard seriousness.

DANGER :-

  Danger indicates an imminently hazardous situation which, if not avoided, will result 

in death or serious injury, and property damage

WARNING :-

 Warning indicates an imminently hazardous situation which, if not avoided, could 

result in death or serious injury, and property damage.

CAUTION :-

 Caution indicates a potentially hazardous situation which, if not avoided, may result 

minor or moderate injury or property damage.

NOTICE :-

 Notice is used to notify people of installation, operation, or maintenance information 

which is important but not directly hazard-related.

CAUTION

These general instructions deal with the normal installation, operation, and maintenance 

situations encountered with the equipment described herein. The instructions should not be 

interpreted to anticipate every possible contingency or to anticipate the final system, crane, 

or configuration that uses this equipment. For systems using the equipment covered by this 

manual, the supplier and owner of the system are responsible for the system’s compliance 

with all applicable industry standards, and with all applicable federal, state and local 

regulations/codes.

This manual includes instructions and parts information for a variety of trolley and hoist 

types. Therefore, all instructions and parts information may not apply to any one type or size 

of specific trolley or hoist. Disregard those portions of the instructions that do not apply.

Record your hoist and trolley’s Product Code and Serial Number on the front cover of this 

manual for identification and future reference to avoid referring to the wrong manual for 

information or instructions on installation, operation, inspection, maintenance, or parts

Use only Indef authorized replacement parts in the service and maintenance of this trolley.

Hercules Hoists Limited ©2020

Note :- Due to continuous development and improvement specification listed above may be changed without notice

Indef CHAIN ELECTRIC HOIST

Hercules Hoists Limited ©2020

Note :- Due to continuous development and improvement specification listed above may be changed without notice

Indef CHAIN ELECTRIC HOIST

Summary of Contents for CH III
























Reviews: