PVJ3
page 10
10
4.9 Standby Stop Time Setting
Standby Stop Time will now be displayed.
The Cursor will be flashing under the first digit of the STANDBY STOP TIME
setting. Simply type in the appropriate time value in minutes & seconds you
want the standby pump to be delayed from stopping once the Standby Stop
Speed has been reached, example 20seconds Press 0, press 0, press 2,
press 0 & then press Return Arrow button.
Press the RIGHT ARROW Button to move onto the next Page.
4.10 2
nd
Standby Start Time Setting
2
nd
Standby Start Time will now be displayed.
The Cursor will be flashing under the first digit of the 2
nd
STANDBY START
TIME setting. Simply type in the appropriate time value in minutes & seconds
you want the 2
nd
standby pump to be delayed from starting once the Standby
Start Speed has been reached, example 20seconds Press 0, press 0, press 2,
press 0 & then press Return Arrow button.
Press the RIGHT ARROW Button to move onto the next Page.
4.11 2
nd
Standby Stop Time Setting
2
nd
Standby Stop Time will now be displayed.
The Cursor will be flashing under the first digit of the 2
nd
STANDBY STOP
TIME setting. Simply type in the appropriate time value in minutes & seconds
you want the 2
nd
standby pump to be delayed from stopping once the Standby
Stop Speed has been reached, example 20seconds Press 0, press 0, press 2,
press 0 & then press Return Arrow button.
Press the RIGHT ARROW Button to move onto the next Page.
You will now be returned to the main screen.
4.12 Maximum Continuous Running Time
This setting allows you to limit the total continuous running time of either pump
to a maximum of 24 hours before alternating to the opposite pump. This
function is only available if both pumps are selected in AUTO.
4.13 Hours Run Meters
To view
‘hours run’ press the FUNCTION (Up arrow) button. The first two
pump hours run meters will be displayed. Press the function button again will
transfer you to the Data logger.
4.14 Data Logger
The data logger logs the last 6 fault events which are number from 1-6 &
display the fault the time of the fault & the date of the fault to view the logger
you enter via the hour meters, press the FUNCTION (Up arrow) button. The
first two pump hours run meters will be displayed. Press the function button
again & the 3
rd
pump hours run meter is displayed, press the function button