⑤
The program finishes
④
The program starts
The rollers will return to their storage positions (upper part of the reclining seat back), and the power of the operating
mechanism will shut off. (The POWER button flashes while the rollers are returning to their storage positions.)
If you want to raise the reclining seat back, press the POWER button again to turn the power on, and then raise the seat back.
When shiatsu point locating is completed, the
Complete light turns on and the program starts.
Adjustment in Manual Selection Mode
●
A basic operation can be changed and the air can be
canceled or its intensity adjusted.
Adjustment in Preset Programs
●
The air can be canceled or its intensity adjusted.
Preset Programs starts
Manual Selection Mode starts
Changing Courses
Before the course in progress finishes, you can change it to another course. After a total duration of 30 minutes, the
course in progress stops even if not completed, and the POWER button turns orange.
Switching from One Preset Program in Progress to Another
When one preset program button is pressed while another preset program is in progress, the rollers return to their
storage positions, then the selected program starts from the automatic shiatsu point location operation.
Switching from a Preset Program to Manual Selection Mode
When one of the buttons for manual selection mode located inside the panel of the remote control is pressed while
a preset program is in progress, the preset program immediately stops, and the selected operation starts. If ROLLING,
HUMAN HANDS or NECK AIR is selected, the operation starts after the shiatsu points are located.
(To select an air massage, first select an operation such as kneading or tapping, or press the POWER button to stop
the preset program in progress before making the selection.)
Stopping in the Middle of a Massage
To stop mid-massage, press the POWER button. The rollers will return to their storage positions and stop.
In an emergency
or
if there is some malfunction
during the operation of the chair, press the STOP
button. The rollers will stop immediately. After confirming safety, press the POWER button. The rollers will return to
their storage positions and stop.
Caution
●
If you feel the massage is too strong, reduce the stimulation according to this Operating Manual. If
this solution does not work, stop using and contact the vendor.
→
May result in injury if you continue use with high stimulation under such circumstances.
●
Do not place hands or feet into the roller tracks, into the space between the seat back and the seat
or into the moving parts.Do not sit wearing hard objects, such as hair accessories, or a necklace,
watch, bracelet or ring.
●
If your leg or foot comes out of the leg rest during the massage, do not try to force it back in.
●
Keep massage sessions to no more than 15 minutes in length. Do not exceed 5 minutes for area
specific massage of any particular part of the body.
→
Continuous use for extended periods of time can result in over-stimulation, which could cause the opposite of the
desired effect, or even injury.The total amount of time for a daily massage should be limited to about 30 minutes.
Precautions for Preset Programs
When a preset program is selected, the reclining seat back may move automatically. Also, the reclining seat back may
move automatically even while a program is in progress. For this reason, before using the chair, make sure that there is no
person or obstruction behind it. Also, do not let other people approach the chair during use.
16
[S
TA
RT
IN
G
A M
AS
SA
G
E]
