9
Main Power Connection
①
First, plug the power
cord into the cord
connector located at the
rear right of the chair.
Then, plug the other end
into the wall outlet.
②
Set the main POWER
switch located at the rear
right of the chair to ON.
*
If the main POWER switch is turned on while the rollers are stopped in the middle of the movement, they will automatically return to the starting position (upper part
of the reclining seat) then stop.
Warning
Caution
●
Do not use with any type of trans-
former device.
→
May result in damage to the chair or
electric shock.
●
Before plugging the power cord into the wall outlet, make sure that
the main POWER switch is set to OFF.
●
Make sure that the plug on the power cord is inserted fully into the
wall outlet.
●
Before using the chair for the fi rst time, turn on all the switches in
order as indicated in this Operating Manual to check that the chair
is operating properly.
BEFORE USE
[B
EF
O
RE U
SE
]
Checking the Seat Cover
Before using the chair, check the seat cover for tearing with the following procedure.
①
Open the side zipper on the back pad.
②
Check for holes or tears in the chair covering by
inserting your hand between the back pad and the seat
back.
Caution
●
Be sure to check for tearing on the chair before every use, as shown in the illustration. Also,
check the other parts for tearing. If you fi nd a tear, no matter how small it is, stop using the
chair immediately, unplug the power plug and contact the vendor for assistance. Never
take off the chair covering or use the chair while the covering is torn. Doing so is extremely
dangerous.
Zipper
Neck Massage Unit
Back Pad
Back Pad
Chair Covering
Reclining Seat Back
