How to Sit
When the chair is off, the rollers are normally drawn back into the left and right sides of the upper part of the seat back
(storage position). For the safety, first check the position of the rollers. If they are in any position other than storage
positions, turn the main POWER switch on before sitting down to allow the rollers to return to their storage position.
When you finish checking, sit down slowly in the center of the seat.
Caution
●
Do not sit down on the chair with the leg rest raised.
→
Any sudden, heavy weight on the leg rest could cause damage to the mechanism. Also,
accident or injury may result if the chair tips over.
●
Before using, raise the reclining seat to its fully upright position. Then recline the seat back
slowly to the most comfortable position, remembering to start off with a lighter massage.
Neck Massage Unit Adjustment
You can adjust the position of the neck massage unit to keep your head in a comfortable, natural position during your massage.
Proper Position of Neck Massage Unit
●
Because the neck massage unit is balanced by a weight attached to its rear, you can adjust its position simply by moving the neck
massage unit up or down.Adjust the neck massage unit to match the height of your head before starting the massage.
●
Place the neck massage unit in a proper position. If it is not placed properly, the automatic shiatsu point locator may not function
properly.
Caution
●
Because a weight is attached to the neck massage unit, do not throw the unit or swing it
around. Be especially careful if there are small children in your household.
→
May result in personal injury.
10
POSITION ADJUSTMENT
[P
O
SIT
IO
N A
D
JU
ST
M
EN
T]
How to Use the Buffer Pads
If you feel that the massage is too intense, insert the supplied buffer pad (thin) into the rear of the back pad.
If you still feel that the massage is too intense, replace the thin buffer pad with the thick one and start the massage again.
How to Insert a Buffer Pad
Turn over the back pad, peel open the velcro of the buffer pad
pocket on the rear of the back pad, and insert the buffer pad.
Caution
●
Do not use both buff er pads at
the same time.
→
May result in accident or injury.
●
Make sure that the buff er pad
does not curl up or become lop-
sided.
→
May result in accident or injury.
For details on how to turn over the back pad, see
①
in
“Checking the
Seat Cover” on page 9.
Active
Area
Active
Area
The active area makes
contact with the back
of the neck.
The active area makes
contact with the back
of the head (occipital).
Velcro
Buffer Pad
Buffer Pad
How to Properly Use the Buffer Pads
Do not use
2 pads.
Replace.
(Remove)
