970-498-1500
www.in-situ.com
2019-02-27 | 0062540
Page 3
Open the ANT Tool and
select the correct COM
port from the dropdown
list.
Select the Probe and
set-point configuration
option.
Choose the
Communication 1 tab.
Enter your FTP
credentials, such as
server, username,
and password. Click
Write options and
parameters.
Click General
information,
parameters and
Options. Then click Set
Clock.
Under the
Connected
Probes tab, choose the
appropriate instruments
from the dropdown lists.
Click Write probes and
set-points.
If your instrument
doesn’t have an internal
battery, check Power
Supply to the Probes.
Close the window.
a
a
b
b
Click Frequency of
Wake -up events.
Select the Frequency
of probe readings and
options tab.
Enter the frequency
of probe readings in
minutes.
Specify how often the
Tube saves the readings.
A value of 1 means every
reading.
Specify how often the
Tube transmits the
readings. A value of 1
means every reading.
Select the significant
digits to be included in
the data.
Click Write frequency
and options. Close the
window.
Select Functional mode
and test.
Click the Test tab.