background image

HOBO® Occupancy/Light 
Data Logger (UX90-005x/-006x) Manual 

15433-E 

The HOBO Occupancy/Light data logger monitors room occupancy up to 5 or 12 meters away 
(depending on the model) as well as indoor light changes with its integrated sensors. Using 
HOBOware®, you can easily configure both channels to record occupancy and light on and off 
conditions for building energy audits. This compact data logger has a built-in LCD screen for 
checking status, remaining battery level, and memory consumption. You can also use the LCD 
screen to quickly calibrate the logger to the light level in the room or select preset sensitivity 
thresholds with HOBOware. There are two models of both types of loggers: the UX90-005/-006 
has a memory capacity of 128 KB while the UX90-005M/-006M has 512 KB. 

Specifications 

Occupancy Sensor 

 

Detection Range 

UX90-005x: maximum 5 m (16.4 ft) 
UX90-006x: maximum 12 m (39.4 ft) 

Detection Performance 

UX90-005x: 94° (±47°) Horizontal; 82° (±41°) Vertical (see Figure A)  
UX90-006x: 102° (±51°) Horizontal; 92° (±46°) Vertical (see Figure B) 

Detection Zones 

UX90-005x: 64 (see Figure A) 
UX90-006x: 92 (see Figure B) 

Light Sensor 

 

Light Threshold 

> 65 lux 

Light Type 

LED, CFL, fluorescent, HID, incandescent, natural 

Logger 

 

Memory Modes 

Wrap when full or stop when full 

Start Modes 

Immediate, push button, date & time, or next interval 

Stop Modes 

When memory full, push button, or date & time 

Time Accuracy 

±1 minute per month at 25°C (77°F) (see Plot A) 

Battery Life 

1 year typical use 

Battery Type 

One 3V CR2032 lithium battery 

Memory 

UX90-005/-006: 128 KB (84,650 measurements, maximum) 
UX90-005M/-006M: 512 KB (346,795 measurements, maximum) 

Download Type 

USB 2.0 interface 

Full Memory Download Time 

10 seconds for 128 KB, 30 seconds for 512 KB 

Operating Range 

Logging: -20° to 70°C (-4° to 158°F); 0 to 95% RH (non-condensing) 
Launch/Readout: 0° to 50°C (32° to 122°F) per USB specification 
Occupancy Sensor Range: 20° to 60°C (-4° to 140°F); 15 to 85% RH 
(non-condensing) 

LCD 

LCD is visible from: 0° to 50°C (32° to 122°F); the LCD may react slowly 
or go blank in temperatures outside this range 

Size 

UX90-005x: 3.66 x 8.48 x 2.36 cm (1.44 x 3.34 x 0.93 in.) 
UX90-006x: 3.66 x 8.48 x 2.87 cm (1.44 x 3.34 x 1.13 in.) 

Weight 

30 g (1.06 oz) 

Environmental Rating 

IP50 

 

The CE Marking identifies this product as complying with all relevant 
directives in the European Union (EU). 

 

 

HOBO Occupancy/Light 
Data Logger 

Models: UX90-005 

UX90-005M 
UX90-006 
UX90-006M 

Included Items: 

 

Command™ strip 

 

Double-sided tape 

 

Hook & loop strap 

Required Items: 

 

HOBOware 3.3 or later 

 

USB cable (included with 
software) 

Accessories: 

 

Light pipe (UX90-LIGHT-
PIPE-1) 

 

U-Shuttle (U-DT-1) 

 

UX90-005x

UX90-006x

Summary of Contents for UX90-005








Reviews: