Short Manual GMH 5550 Data logger
H80.0.01.6HC-02
2 logger functions: cyclic and manual logger
The adjustments are done as described in
“Configuration”, but go to sub-menu “SEt LoGG” instead of “SEt LoGG”. The
submenu contains the following parameters:
Attention:
Menu can be only called if logger not active and no logger data stored!
Menu
Parameter
Value
Description
or
Set Logger: Settings for logger function
Selection of logger function
CYCL
Cyclic
: automatic recording with adjustable cycle time
Stor
Store
: manual recording with keypress “store”
oFF
Logger deactivated
0:01... 60:00
Cycle time in [minutes:seconds] (for cyclic logger)
1
Manual Recording („Func-Stor“)
a) Save measured value manually:
Press shortly: data set is saved (“St. XX” is displayed shortly, XX = data set number)
or
Input of measuring point “L-Id”: Number between 0…32768
Confirm input with “enter”
If logger storage is full, display will show:
b) Read manual recordings:
Press for 2s: display shows (only if data sets are stored):
Press shortly: change between measuring values, measuring point and date+time of the data set
or
Change between different data sets
End display of recordings
