－
20
－
VM-5011A Instruction Manuals
(TVE-6-4188E / Version 1.20)
Appendix.3 About voltage input connection specifications
The current for driving IEPE sensor (sensor) is output from sensor input terminal of
converter. This converter can be set to ON (IEPE sensor connection) or OFF (voltage input
connection) of the drive current supply with jumper JP3 (see Fig.A-3).
Fig.A-3 Sensor drive current supply setting
Memo
(1) Refer to "7. Change of Measurement Range and DC Output" for how to pull out the
board.
(2) In the case of voltage input connection, POWER lamp lights up after power is
supplied regardless of the cable connection status to the sensor input terminal.
JP3
Enlarged View of JP3
IEPE Sensor
Connection
Current Supply ON
(Factory Default)
1
2
1
2
Voltage Input
Connection
Current Supply OFF
Note
Jumper settings other than those shown
above are prohibited.
