－
9
－
VM-3024S/H Instruction Manual
(Compatible with Version 2.16 or later)
3-1. Before Getting Started
(1) You can select the computing method for velocity, acceleration, and displacement.
Refer to section 4-2 for more details. Initial settings are as follows:
■
Acceleration (ACC):
rms
■
Velocity:
rms
■
Displacement:
EQP
(1) If you are familiar with our VM-3004 or VM-3304, EQP setting for the
displacement is highly recommended. Since the measurement data with the VM-
3004 and VM-3304 is indicated in EQP, you may easily compare the data with the
same setting.
(2) For measurement of the vibration severity, velocity setting needs to be “rms.”
(2) Check the polarity carefully, and set two AA batteries in the battery box (Ni-Cd or
Alkaline) (Fig.3-2).
For the use with the AC adaptor, connect the AC adapter cable to the power connector
in the bottom of the device.
(a) Installing AA batteries
(b) Attaching the AC adapter
Fig.3-2 Power Supply Method
Pay attention to the polarity of the battery.
(3) Connect the pickup cable to the pickup connector.
In addition, when measuring, pickup installed or fixed for object. For actual measurement,
refer to the following sections.
Refer to section 10 when fixing the pickup.
(4) Display Language Setting
VM-3024 can switch between Japanese and English as needed. Refer to section 4-6.
+
+
DC Jack
Caution
Caution
Caution
