－
35
－
VM-3024S/H Instruction Manual
(Compatible with Version 2.16 or later)
Precautions when Saving Waveform Data
(1) Waveform data is the physical amount displayed at the top in measurement mode.
Display the physical amount you want to collect at the top of the measurement
mode, and then save the waveform data.
(2) The range setting is not relevant when saving waveform data.
(3) If you move to waveform data save with a large amount of waveform data stored
in SD, it may take some time before waveform acquisition can be started. To
smooth the waveform data save, delete the waveform data in the SD as
appropriate. Note that deletion of data in SD cannot be performed with VM-
3024H. After removing SD card, make a backup of the necessary data and delete
it with a PC.
5-2-2. Setting of Waveform Data Save
Fig.5-9 is the display of data save setting.
(Japanese)
(English)
Fig.5-9 Parameter Setting of Data Save
10
2.5
10
2.5
Caution
