－
11
－
VM-3024S/H Instruction Manual
(Compatible with Version 2.16 or later)
3-3. Operations during Measurement
Touching “Start” on the touch screen or press “Measurement Button” in Fig.3-3 would
start measurement. The screen displays measurement status (Fig.3-4).
Once you touch “Hold” on the touch screen or press “Function Button” would hold
measurement and the display (AC output when stopped is not retained).
(Japanese)
(English)
Fig.3-4 Display during Measurement
(1) How to change the Range
When the Auto Range function is “OFF” (refer to section 4-4.), the range key will
be activated during measurement (Fig 3-4).
Touching “Range” on the touch screen or pressing “Function Button” will show the
range setting display. You may adjust the range accordingly.
The icon
will appear on the upper right corner of the screen when the value is
over the range (Fig.3-5).
(2) About Excessive Input State (Measurement Impossible State)
When
is displayed on the upper right of the screen, regardless of main unit
version, input speed value exceeds the hardware range (amplifier gain), and the
waveform is distorted and unsuitableness state.
In this case, do not use it as a measurement value because it is not possible to
measure accurately.
Touch here to zoom in.
Caution
