－
10
－
VM-3024S/H Instruction Manual
(Compatible with Version 2.16 or later)
3-2. Measurement Screen
Turn on the SmartVibro by sliding an orange switch on the left side of the device, initial
screen (Fig.3-3) will appear. Operate the device by using the touch screen and two buttons.
(Japanese)
(English)
Fig.3-3 Initial Screen
(1) Standard Measurement Mode
VM-3024S is equipped with this mode only.
(2) Measurement Range Bar
This shows the level of measurement data.
The data is not absolute, but rough indication.
(3) Function Indicator
Valid functions are indicated.
In Fig.3-3, “Start” and “Setting” are operative.
(4) Battery Indicator
This appears when the battery level is low.
(5) Measurement Button
In the measurement mode, you can start or hold measurement when you press this
button.
In the setting mode, you can check the battery level (refer to section 4-8).
(6) Function Button
In the measurement mode, range display will appear when you press this button.
In the FFT mode (only VM-3024H), this button would switch the display from
detailed to simple indication of the result, and vice versa (refer to section 5-1).
(1)
(2)
(4)
(3)
(5)
(6)
