www.imv-imaging.com |
19
Insemination
1. Repeat the same steps listed previously on
‘checking the cervix’.
2. Slide the Kombicolor guide into the AlphaVision
handle up to the second notch.
3. Push the Kombicolor guide until the insemination
sheath appears on the image at the entrance to
the cervix.
4. Insert the sheath by continuing to push the
Kombicolor guide. 1 notch or ‘click’ is equal to 1cm.
5. Check that the end of the insemination syringe
is positioned correctly by rectal palpation. If the tip
of the sheath is still in the cervix, move the cervix to
help progress the sheath through it.
6. Inseminate by gently pressing the plunger of the
Kombicolor. Be careful not to move the Kombicolor
guide.
7. After completely emptying the straw withdraw
the AlphaVision device slightly.
8. Check the entrance to the cervix to ensure that
no semen flows back.
•
Operating
instructions
Warning:
Do not force it!
!
