Abrelatas Eléctrico
MANUAL DE INSTRUCCIONES
8
• Push the lever down firmly and hold until the can lid is automatically pierced and the
cutting action begins. (Refer to the below drawing)
Note:
It is not necessary to hold the lever down during the cutting cycle.
• When the can is fully opened, the cutting action will automatically stop. The can will
remain in position until the lever is lifted.
• To release, hold the can with one hand and lift the lever to the upright position with the
other hand
Caution: Be careful not to touch the blade as it extremely sharp.
Caution:
Avoid contact with the cut edge of the can, it is sharp.
• Carefully remove the lid from the magnet and discard.
Caution: Avoid contact with the cut lid, it is sharp.
• Unplug the unit.
Opening Bottles
• Place appliance on a flat stable surface.
• To open a bottle, grasp it and position the cap under the metal hook in the bottle opener.
(Refer to the below drawing)
Note:
The bottle opener will only remove metal bottle caps. Do not use it for screw-off caps;
punch in tabs, or on cans with pull rings.
•
Hold the can opener body with one hand and pull down to pop the cap off with the other one. (Refer
to the below drawing)
Caution: Be sure the hook is not under the bottle neck or the glass may break.
Sharpening Knives
•
Place appliance on a flat stable surface.
•
Be sure the knife is clean and free of grease.
Caution: Do not attempt to sharpen hollow ground blades or those with serrated edges. Always use safe
practices when using or sharpening knives, maintain hands away from the knife blade.
•
Place heel of knife into the guide slot located on the back of the can opener. (Refer to the below
drawing)
•
Lightly draw the blade towards you, applying a slight downward pressure.
•
Repeat this procedure four to five times to put a sharp edge on the knife.
