Abrelatas Eléctrico
MANUAL DE INSTRUCCIONES
6
HOW TO USE YOUR CAN OPENER
Opening Cans
•
Place appliance on a flat stable surface.
•
Plug into a standard 120 Volt AC outlet.
•
Lift the lever to the upright position. (Refer to the below drawing)
Caution: Be careful not to touch the blade as it is extremely sharp.
•
Place the can so that the lower edge of the can lip rests on top of the drive wheel. Be certain
that the cutting blade is on the inside of the can lip. (Refer to the below drawin
Note: This can opener should not be used to open cans designed to be opened by another method,
such as a pull tab, peel-off seal, or rolling key. This can opener will not open rimless cans or with angled
corners.
Note: If there a dent in the rim of a can, open the other end or start the cutting action just beyond the dent.
Note: Aluminium lids will not stick to the magnet.
Blade Assembly
8. Lever
9. Blade
10.
Handle Magnet
BEFORE FIRST USE
•
Remove all packing material and stickers from the product and save instruction manual.
•
Cut and remove tie wrap located between the electric plug blades.
•
Before using your new appliance, wipe the body of the appliance with a damp cloth.
•
To wash the blade assembly:
• To detach the blade assembly from the unit:
1. Lift lever to vertical position.
2. Hold can opener body with one hand while gently pulling the blade assembly away
from the front of the unit with the other hand. Wash in warm sudsy water and
then rinse and dry thoroughly.
Caution: Be careful not to touch the blade as it is extremely sharp.
• To re-attach the blade assembly back on the unit:
1. Hold lever in the vertical position.
2. Insert the blade assembly into the key hole locate near the drive wheel and push the
lever in all the way.
3. Rotate the lever clockwise until it is horizontal.
Note: If the blade assembly is properly engaged, it cannot be removed from the can opener
when in horizontal position.
Caution: Be careful not to touch the blade as it is extremely sharp.
8
9
10
