2.3 Dimensions junction box
2.4 Installation of junction box
The connection cable of 4 m (13”) length allows installation of the junction box
at such a distance, that the ‘clicking’ of the relays will not disturb the helmsman.
Should the junction box need to be installed at a larger distance, extension
cables are available in 3 m and 6 m. Maximum distance between the touch pad
and the junction box is 10 m.
The junction box must be mounted in a horizontal position and in a vibration
free location. The junction box contains relays that will not reset properly if
mounted otherwise.
The junction box has four mounting locations (holes not yet drilled). Only two
locations can be used, as the other two are blocked by the circuit board. The
box needs to be opened for drilling the two holes from the inside. The box can
then easily and quickly be fitted using stainless steel screws or bolts and nuts.
8
3 Electric connections
3.1 General lay out
3.2 Wiring codes
Code and function
1: B
9: Wiper 3 self-park
2: Wiper 5 relay
10: High speed connection
3: Wiper 5 self-park
11: Wiper 2 relay
4: Negative (-)
12: Wiper 2 self-park
5: Wiper 4 relay
13: Washer pump output
6: Wiper 4 self-park
14: Wiper 1 relay
7: Dynamic park relay
15: Wiper 1 self-park
8: Wiper 3 relay
9
73
35
113
115
155
75
Mounting holes
Dimensions in mm.
W 2
W 1
W 3
W 4 W 5
4m (13’)
WIPER
CONTR
OL
O
N
/
O
F
F
W
A
S
H
E
x
a
lt
o
WIPER CONTROL
ON/OFF
WASH
Exalto
1
4
7
10
13
3
6
9
12
15
14
11
8
5
2
80
154
200
98
144