1 General
1.1 Functions
Brief explanation of buttons and LED’s. Please, check chapter 4 for complete
operating instructions.
Pos. Function
1
Main ON/OFF switch and LED
Turns main power to the system on and off
2
Individual wiper ON/OFF buttons
Turns each wiper ON or OFF
3
Individual wiper LED
Lights when appropriate wiper is operating
4
Intermittent button
Increases the frequency of wiping in the intermittent mode
5
Intermittent button
Decreases the frequency of wiping in the intermittent mode
6
LED indicator bar
Used to indicate continuous mode or the intermittent setting
7
Wipe/wash button
Activates the wipe/wash program
4
1.2 Description
This electronic wiper control consists of a touch pad with 4 metres (13”)
connection cable and a separate junction box. The operation is based on a
microprocessor and controls up to three wipers. Each wiper can be switched
ON and OFF individually, but they can also run together.
This wiper control offers:
• two continuous speed;
• three intermittent speeds;
• self parking;
• wipe/wash program.
This control includes visual indications when it is ON, and for the continuous
and intermittent modes.
1.3 Power supply
This wiper control is available in two versions to operate under a power supply
of 12V or 24V DC. Check the power supply of the unit supplied,
before
connecting it to the ships electric system.
1.4 Technical specifications
Power supply:
8 – 15V (12V) and 16 – 30V (24V)
Stand-by power consumption: less than 4W
Protections:
reversed polarity
Working temperature:
-10°C to +60°C
Storage temperature:
-30°C to +70°C
Inputs:
1 – 5 parking signals
Outputs:
1 – 5 wiper contacts
pump/solenoid
Max. amperage draw:
12V wipers: 8A
24V wipers: 4A
pump/solenoid: 1A
1.5 Default settings
When the wipers are switched ON, an internal test will be carried out. All LED’s
in the LED indicator bar will lit for a few seconds. All wipers will start in the five
second intermittent mode, and LED’s A and B will be illuminated.
5
WIPER CONTROL
ON/OFF
WASH
E x a lto
2
3
4
1
7
6
5