IMR® 2800
4
IMR Environmental Equipment, Inc.
IMR reserves the right to adopt technical modifications without prior notice.
INTRODUCTION
Thank you for purchasing the
IMR® 2800 combustion gas analyzer
.
Please read the following instructions before operating the unit for the first time.
Proper handling is necessary to make full use of the outstanding performance and features of
this combustion gas analyzer.
IMPORTANT INFORMATION:
Use the instrument just within the recommended temperature range.
Never measure without the dust filter and condensation trap.
The dust filter must be cleaned/replaced when dirty.
The c8ondensation trap must be checked and the condensed water removed if necessary.
IMR
or an authorized service facility must re-calibrate the
IMR 2800
once a year to
ensure accuracy and performance.
SAFETY INSTRUCTIONS
Please make sure that you read this section carefully for use of your new combustion gas
analyzer.
Follow all warnings and instructions marked on the product or displayed on the screen.
The AC inlet should only be connected to a socket with a protective earth contact.
Any adjustment or maintenance of the analyzer under voltage should be avoided.
The maintenance of the analyzer should be done by qualified personal and the instrument
must be turned off and unplugged.
Do not take the analyzer out of the box during the warranty period. If you do so, then the
warranty is null and void.
Do not use this analyzer in water.
Never spill water or any liquid on the analyzer.
