IMR® 2800
26
IMR Environmental Equipment, Inc.
3.5.2 Config. printer
This menu sets print intervals and prints the memory.
== Config. Printer ==
Printer off
Print protocol
Print memory
Move the arrow selector up or down ("^","
v
") to select a
submenu.
Confirm the submenu by pressing the "
" button.
Active buttons
Move arrow selector up
^
Back to measurement menu
ESC
Move arrow selector down
v
Confirm selection
Printer off:
Stops the interval printouts.
Print protocol:
Sets print intervals: one printout every x minutes
The print intervals can be set for a measurement printout or a statistics printout.
===Confi. printer===
--- print protocol ---
Minutes/Output
15
The time between the printouts can be selected from 10 to 99
minutes by using the numeric keys.
Confirm the setting by pressing the"
" button
The first printout is after one minute and the following printouts are every x minutes.
Continuous output
Press any key
If statistics and RS 232 transfer are activated, then the print
intervals cannot be started.
Print memory:
This submenu prints the last stored measurement.
Memory empty
Press any key
If there are no measurements stored, the display shows.
