IMR® 2800
38
IMR Environmental Equipment, Inc.
3.5.8.5 Change fuel parameters
Fuel constants of all fuel types may be changed if needed.
The fuel constants of the selected fuel are shown on the LCD.
The fuel constants are important to the calculated values and therefore they should be changed
only if the new constants are known and correct.
Fuel constants:
-
CO2max value in ppm (% x 10000 = ppm)
-
A2 x 10000 (BImSchV -fuel type)
-
B x 10000 (BImSchV - fuel type)
-
Reference O2 value in %
-
K x 10000 (Siegert - fuel type)
-
Alpha (Siegert - fuel type)
===Organization===
---Change fuel par---
CO2max ppm
15500
Enter the new numbers by using the numeric buttons.
Pressing "
" button confirms the new numbers and scrolls to
the next constant.
Press "ESC" to return to the measurement menu
Stop stat.
Press any key
If the statistic is active, then the fuel parameters cannot be
changed.
3.5.8.6 Station
A station (measurement, plant, etc.) can be entered.
===Organization===
----Station----
Station 0
Station no.: 0 - 32767
The number will be printed on the measurement printout and /
or transferred together with all other data via the RS232.
If the station is set at 0, then station no. will not appear on the
printout or data transfer.
3.5.8.7 Select language (if equipped)
The language can be set either in English, German or French.
===Organization===
----Select language----
English
German
Move the arrow selector up or down ("^","
v
") to select a
language.
Confirm the change by pressing the "
" button.
2 languages are shown on the LCD. To see the other language
scroll with the "^" and "
v
" button.
