IMR® 2800
32
IMR Environmental Equipment, Inc.
3.5.8 Organization
The submenu organization has different menus to set date, time, interface RS232 and check
device status and much more.
Submenus
Device status
Checks operating hours and overflows
Set date/time
Sets date and time
Interface
Sets Baud Rate, continuous output, format
Configuration
Program version, sensor ranges
Change fuel par.
Changing fuel type constants
Station
Edit station numbers
Select language
English - German – French
Switch Gas 1 / Gas 2
Switches between Gas 1 and Gas 1 sensors
===Organization===
Device status
Set date/time
Interface
Move the arrow selector up or down ("^","
v
") to select a
submenu.
Enter the submenu by pressing the "
" button.
3 submenus are shown on the LCD. To see the other submenus
scroll with the "^" and "
v
" button.
Active buttons
Move arrow selector up
^
Back to measurement menu
ESC
Move arrow selector down
v
Confirm selection
3.5.8.1 Device status
The device status menu shows information about the operating hours of the unit as well as the
overflows of the sensors.
Overflow:
A measurement above the measuring range of a sensor is called 'overflow'.
An overflow damages the sensor and it can decrease the lifetime of the sensor.
===Organization===
---Device status---
Lifetime (hours)
30.61
The operating hours are displayed in hours and hundredths of an
hour.
Scroll to the overflow display of the various sensors by using
the "^" and / or "
v
" button.
Press "ESC" to return to the measurement menu
