Impulse HSR007, Owner'S Manual

Page: 38 / 59

Page 8 of 31
PROGRAM SETUP MODE
To enter the PROGRAM SETUP mode the user needs to press the SELECT WORKOUT button on the IDLE
screen.
.1 WORKOUT SELECTION SCREENS
In this mode the user shall be asked to select the type of program that they would like to do. The graphic below
shows the available WORKOUTS screens that can be displayed during this mode.
There shall be four workout types that can be selected and they are as follows:
 Time Goal
 Distance Goal
 Calorie Goal
 Intervals
“DISTANCE GOAL” and “CALORIE GOAL” are longer than can be displayed at once on the screen, so each of
these prompts shall scroll from right to left and repeat continuously until a new workout choice is made or the
displayed workout is chosen (i.e. user pressed ENTER).
The first screen that will be shown is the one for TIME GOAL . To select between the available workouts, the user
shall press either the DOWN or UP button to navigate to the next or previous choice respectively.
If the user presses the ENTER button they are selecting the displayed workout and the system shall transition to
the applicable setup screen.
To exit the
WORKOUTS
screen and return to the
IDLE
screen the user shall press the
STOP
button.
─
38
─
Console Panel Functions