Page
7
of
31
IDLE MODE
During the
IDLE MODE
the system is waiting for the user to press either the
START
or
SELECT WORKOUT
buttons. The initial state of the display readouts shall be as follows:
In the area of the graphic
above where it shows “PRESS STAR” this shall be replaced with the following sentence
that will be scrolled from right to left repeated unit a user makes a selection or the system times out due to 30
seconds of inactivity:
To begin a workout quickly the user can press the
START
button on the keypad. Pressing this button will transition
the system to
PROGRAM MODE
. See section
6 PROGRAM MODE (I.E. In-WORKOUT FUNCTIONALITY)
below
for more details.
To select a specific workout the user can press the
SELECT WORKOUT
button. Pressing this button shall
transition the system to
PROGRAM SETUP MODE
. See section
5 PROGRAM SETUP MODE
below for more
details.
In addition to these features, the user shall also be able to enter
CONFIGURATION MODE
if they press the
START
,
UP
, and
STOP
buttons simultaneously. See section
8 CONFIGURATION MODE
below for more details.
Also, if the user does not press any buttons to select or start a workout, then the console shall transition to
SLEEP
MODE
with 30 seconds of inactivity.
─
37
─
Console Panel Functions
Summary of Contents for HSR007
