Impulse HSR007, Owner'S Manual

Page: 36 / 59

Page 6 of 31
SYSTEM MODES OVERVIEW
Wake Mode – This is the mode the system enters upon power up or when it awakes from Sleep Mode. All system
initializations happen in this mode.
Idle Mode – This is the mode the system enters upon successful power up of the system. At this point the system
is waiting for the user to select their desired workout or begin exercising. Refer to section 4 IDLE MODE below for
all relevant details.
Program Setup Mode – This is the mode the system is in after the user has selected a program and needs to
enter the required parameters prior to the program actually starting. Refer to section 5 PROGRAM SELECTION
AND SETUP
below for all relevant details.
Program Mode – This is the mode the system is in during a given workout. Refer to section 6 PROGRAM MODE
(I.E. IN-WORKOUT FUNCTIONALITY) below for all relevant details.
Pause/Summary Mode – This is the mode the system enters when the user stops exercising (i.e. RPM of flywheel
is less than a predetermined value). User data is maintained and displayed in the applicable indicators during this
mode waiting for the user to resume or terminate their workout. Refer to section 7 PAUSE/SUMMARY MODE
below for all relevant details.
Configuration Mode – This is the mode the system needs to be in prior to making any configuration changes,
perform systems tests, update firmware, or review maintenance or performance metrics. Refer to section 8
CONFIGURATION MODES below for all relevant details.
Sleep Mode – This is the mode the system enters to conserve power when the console is not in use. In this mode
the console LCD shall be blank.
─
36
─
Console Panel Functions