manualshive.com logo in svg

impinj SPEEDWAY IPJ-R1000, User Manual, Page: 47 / 75

Share
Download
impinj SPEEDWAY IPJ-R1000 User Manual Download Page 47

 

 

 

 

 

 

 

 

 

                                                                                             

Speedway Reader IPJ-R1000 for UHF Gen 2 RFID

 

 

 

 

 

47

ntp      - Submenu of NTP specific commands. 
trace    - Submenu of network trace specific commands.

 

8.4.4.1. 

config network domain Command 

The 

config network domain

 command configures a search domain on the reader device. This domain will be used if the 

DHCP network does not provide a search domain to the device or the IP address mode is static. The command parameters are 
shown in Table 8-6. 

Table 8-6   "config network domain" Command Parameters 

Command 

Options 

Format 

Description 

domain  

STRING 

Configures a static search domain for the reader. If 
DHCP is used, this static domain is not used. If the IP 
address mode is turned to static, this domain will be put 
to use. If the STRING is absent, this command deletes 
the static search domain. 

 
The command usage is shown below: 
 

Usage:  config network domain <domain-name> 

 

A sample of the command and response is shown below: 
  

> config network domain bar.com 
Status=0,'success' 

8.4.4.2. 

config network hostname Command 

The 

config network hostname

 command configures a hostname on the reader device—the hostname to be used if the DHCP 

network does not provide a hostname to the device. The command parameters are shown in Table 8-7.  

Table 8-7   "config network hostname" Command Parameters 

Command 

Options 

Format 

Description 

hostname  

STRING 

Configures the current hostname for the reader.  
Parameters returned from DHCP will override this value. 

 
The command usage is shown below: 
 

Usage:  config network hostname <host-name> 

 

A sample of the command and response is shown below: 

  

> config network hostname speedwayc11 
Status=0,'success' 

8.4.4.3. 

config network dhcp Command 

The 

config network dhcp 

command allows the user to modify the DHCP client configuration. The commands are described 

below. 

Commands: 
sendhostname 

- Turn on/off send-hostname in DHCP client config. 

userclass 

 

- Set the user class option of DHCP client config. 

exit         

- Exit this submenu and return to the parent menu. 

help         

- Displays this help message. 

.            

- Exit this submenu and return to the parent menu. 

?            

- Displays this help message. 

 
Sub-menus: 
None

 

Summary of Contents for SPEEDWAY IPJ-R1000












































































Reviews:

No comments