Speedway Reader IPJ-R1000 for UHF Gen 2 RFID
20
6. Using the Speedway Reader
Once the Speedway reader settings have been established, the user may proceed directly to the
Operation
screen by clicking
its menu navigation button.
6.1. Operation Screen—Monitoring Inventory Results
From the Operation page, simply click the Start
/
Stop toggle button to begin reading tags within range of the reader. The Clear
button clears the results of the inventory operation that commenced with Start.
Tags being read are displayed in white fields, which fade to blue after not being seen by the reader within the last ~10 seconds.
To see all tags and their status, simply scroll the screen.
As tags are read, their EPC numbers appear in the primary window of the Operation screen. If the Read
TID button on the
Operation screen has been enabled, the logo of the tag silicon manufacturer corresponding to the TID will also be displayed.
In addition to the EPC and TID, the results displayed include: Read
Rate (expressed as tags/sec), Running
Time (in hh:mm:ss
from last Start), Total
Tags (total number of tags read), and
Total
Active
Tags (number of tags currently in the reader's field of
view).
For more sophisticated inventory operations, the
Inventory Filter
and
Tag Access
pages allow the selection of tags according
to user-specified criteria and rules. To access the Inventory Filter, Tag Access or protocol setup menus, any currently executing
operation must be stopped.
Figure 6-1 Operation Screen
6.2. Operation
Screen—Filters
If the Inventory Filter has been activated (see Section 6.3), this status will be indicated in the Operation screen view (see Figure
6-2) with the text **Inventory Filter** appearing at the top of the screen. Likewise, if the Halt
Filter has been activated (see
Section 6.4), the text **Halt Filter** will appear.
Auto Continue