manualshive.com logo in svg

impinj SPEEDWAY IPJ-R1000, User Manual, Page: 2 / 75

Share
Download
impinj SPEEDWAY IPJ-R1000 User Manual Download Page 2

 

 

 

Speedway Reader IPJ-R1000 for UHF Gen 2 RFID

 

 

 

2 

Overview 

The EPCglobal™-certified Speedway™ IPJ-R1000 reader is a stationary UHF Gen 2 RFID tag reader that provides network 
connectivity between tag data and enterprise system software. 
 
A key element of Impinj's GrandPrix™ RFID system solution, the Speedway reader is the first high-performance reader 
designed from the ground up to support the EPCglobal Gen 2 standard in its entirety, including: the accommodation of 640 
kbps tag-to-reader data rates, robust performance in dense-reader environments (without the requirement for network 
synchronization), the elimination of ghost reads, and more. Combined with an extensible architecture that supports seamless 
integration of field-upgradeable, third party application software, the Speedway reader is the most adaptable reader solution 
available today. 
 
This user guide provides instructions on how to install, connect, configure, operate, upgrade, and troubleshoot Speedway 
readers. It assumes the user is familiar with appropriate networking facilities, the EPCglobal Gen 2 specification, and general 
principles of RFID system management.  
 

Important

     

The user guide only covers readers having part numbers in the following format: 

                           IPJ-R1000-USA-N-NN-NN-NNN, IPJ-R1000-EU1-N-NN-NN-NNN, and IPJ-R1000-AS1-N-NN-NN-NNN. 

 

 

 

EPCglobal™ Dense-Reader Certified 
 
Blah, blah, blah 
 
Blah, blah, blah 
 
Blah, blah, blah 
 
 

Summary of Contents for SPEEDWAY IPJ-R1000












































































Reviews:

No comments