manualshive.com logo in svg

impinj SPEEDWAY IPJ-R1000, User Manual, Page: 31 / 75

Share
Download
impinj SPEEDWAY IPJ-R1000 User Manual Download Page 31

 

 

 

 

 

 

 

 

 

                                                                                             

Speedway Reader IPJ-R1000 for UHF Gen 2 RFID

 

 

 

 

 

31

 

Figure 7-3 Pull Mode Upgrade GUI Screen 

 

7.5.3.  Factory Default Restoration 

The following command can be used to restore the Speedway reader's factory default configuration settings associated with the 
currently running image: 
 

•

 

The user can use the Rshell command 

config image factory 

to return the reader to a factory default configuration.  

The command retains the current primary SOP, but defaults the reader’s configuration and erases any custom 
application. See section 8.4.2.1 for details.

 

7.5.4.  Fallback to Previous Image 

The following command can be used to fallback or restore the reader’s previous image in case something was adversely 
affected by the upgrade procedure:  
 

•

 

The user can invoke the Rshell command 

config image fallback

 

to restore the reader to its previous image.  See 

section 8.4.2.2 for details. 

7.5.5.  Query the Upgrade Status 

The following commands are used to query the status of upgrades including factory default and fallback: 

 

•

 

The user can invoke the Rshell command 

show image summary

 

to view the details of the current primary and 

secondary images.  This command also shows the status of pending and completed upgrades as well as error codes 
indicating the reasons for upgrade failures. See section 8.5.2.2 for details. 
 

•

 

The user can invoke the Rshell command 

show image metafile

 

to view the details of the current retrieve mode and 

metafile data. See section 8.5.2.1 for details. 

7.5.6.  Background Execution of Image Management Commands 

Some image management commands are executed in the background and are not finished right away. If a previous image 
management command is still being processed, a subsequent image management command will be rejected with a command 
response code of “

Previous-Command-In-Progress

”.  The following image management commands have this 

behavior: 

   config 

image 

metafile 

   config 

image 

upgrade 

Summary of Contents for SPEEDWAY IPJ-R1000












































































Reviews:

No comments