Cheetah Python Camera with USB3 Interface
–
User Manual
December 5, 2017
Page
57
of
78
Rev 1.0
4.7.13 User Set Controls
Figure 29: User set parameters.
UserSetSelector
: Selects the User Configuration Set (Factory, User Set 1 or User Set 2) to
load or save.
UserSetLoad
: Loads the User Set specified by UserSetSelector into the camera workspace
(volatile).
UserSetSave
: Saves the User Configuration Set specified by UserSetSelector to the non-
volatile memory.
UserSetDefault
: Selects User Configuration Set to load and make active when the device
is reset or after power is applied.
UserGetLastLoaded
: Reports the User Set currently loaded (from the last UserSetLoad
command or device reset).
4.8 Capture Panel
The Capture panel provides options for recording images and video and saving them to
the computer hard drive. Click the Capture tab at the bottom of the IpxPlayer screen to
access the panel.
4.8.1 Recording Acquired Images
Use the Recording section of the Capture screen to record snapped images or video
images. The screen displays real-time capture information during recording.
•
Snap
. Saves the current image to the hard drive.
•
Record
. Starts or stops saving video to the hard drive.
•
Frames
. Shows the number of frames acquired, saved, and dropped during the
current capture session. Dropped frames are frames received from the camera
but not transferred due to a lack of host buffers.
•
Buffer Queue Filling
. Shows the current filling status of the capture frames
queue.
