Cheetah Python Camera with USB3 Interface
–
User Manual
December 5, 2017
Page
15
of
78
Rev 1.0
2.2.2 Power Supply
– Camera Only
Cheetah Python cameras use the PS12V04 Standard Power Supply shown in the following
figure. The PS12V04A supplies power to the camera and provides connectors for trigger
input (black) and strobe output (white).
Figure 3: PS12V04A standard
PS12V04A Standard Power Supply:
Cable length:
Supplied AC power input cable (IEC): 1.8m (6’) 100
- 240 Vac, 50 - 60Hz 1A
Power supply Output (+12V): 3m (10’) ± 15cm (6”) connector HIROSE #HR10A
-10P-12S
Strobe & Trigger: 10cm (4”) ± 1cm (0.5”) connector BNC male
Electrical:
Over-Voltage Protective Installation
Short-circuit Protective Installation
Protection Type: Auto-Recovery
10 -15 VDC 12VDC nominal, 2 A.
Load regulation ± 5%
Ripple & Noise 1% Max.
Regulatory:
Class 1
Safety standards UL60950-1, EN60950-1, IEC60950-1
Safety (1) EMC UL/CUL, CE, TUV, DoIR+C-Tick, Semko, CCC, FCC
Safety (2) BSMI, FCC
2.2.3 Power Supply - Camera with Canon Lens Control
Use the PS12V07B power supply if using the Canon Lens Control with the camera. The
PS12V07B supplies power to the camera and provides connectors for Canon lens control
(grey), trigger input (black), and strobe output (white).
