Imperial DABMAN i300 CD, Operating Manual

Page: 91 / 290

91 IMPERIAL DABMAN i300 CD
E
This way, you can optimally align the telescopic antenna towards stations that are dif-
ficult to receive at your radio’s location. This means that stations that have not yet been
found in a scan can still be found and played.
>
To do so, select MENU > Set Manually and then select a
station frequency. The signal strength of this frequency will be displayed.
> Pressing the INFO button several times switches through different
information such as programme type, multiplex name, frequency,
signal error rate, data bit rate, programme format, date, DLS.
8.4.3. Adjust station order
> Press the MENU button, and then press the button to select station order.
> Select a sorting type and confirm your selection with OK.
8.5 Receiving FM stations
Scan
Use the navigation wheel to select ‘FM’ from the main menu and confirm by pressing
the navigation wheel. By pressing the navigation wheel, you can access the next available
station. Your DABMAN i300 CD has RDS and can display the station name (if broad-
cast).
Scan settings
If you press the Back button of your radio (optionally of the remote control) while the FM
radio is playing, you can specify in the submenu ‘Scan setting’ whether the device should
only consider stations with good transmission quality for the scan.
Audio settings
If FM reception is generally poor, you can specify in the ‘Audio setting’ sub-item that the
stations are only to be played back in mono and no longer in stereo. This can significantly
reduce the noise in the signal.
Manual station search
As an alternative to a scan, you can use the Skip Back/Skip Forward buttons either
directly on the radio or on the remote control to select specific frequencies
and thus find the stations located there.