Imperial DABMAN i300 CD, Operating Manual

Page: 78 / 290

78
Operating Manual
E
6. WHAT DO YOU NEED?
Your DABMAN i300 CD is a network device, which should be integrated into your net-
work like all such devices.
By integrating it into your home network that is connected to the internet
more than 25,000 radio station are available to you.
However, you can also just use your radio as a DAB+ receiver.
The DAB+ reception at your location should suffice for this.
Information about the DAB+ reception in your region can be found on www.digitalradio.
de for example.
To connect the device to the Internet, you need the following:
•
An Internet connection (e.g. DSL, ideally with a flat rate)
• A router for Internet access,
a so-called WIFI router (Wireless LAN) for wireless operation
• For a WIFI integration: Your network key (WEP, WPA or WPA2)
Like any key, it serves to protect against unauthorised access and
has been set up with your network.
To access a network secured in this way, the key
must be entered into the radio later on.
If your network does not have a key,
the device can connect to the Internet without entering it.
Note:
If you are unsure if your network uses such a key,
just try without entering one first! If the device does not work afterwards, repeat the se-
tup procedure. You should know the key then, however, If necessary, ask the person who
set up your network for help.
The WIFI password can often be found on the router’s bottom side,
unless the key has been changed manually.
7. FIRST START-UP
The radio can be controlled using both the device buttons as well as the remote
control. The remote control is the more convenient and easier way to operate the
DABMAN i300 CD. For this reason, this manual mainly explains how to set up and ope-
rate the radio using the included remote control.
Plug the radio into a wall outlet and connect the
power supply.
During the first start-up, a setup wizard starts which will guide you
through the initial setup.