1. Introduction And Warranty
1.1 Introduction
Congratulations on your purchase of an Imperial
Systems, Inc. product. This product has been designed
and manufactured to the strictest specifications. It is
our utmost desire that you achieve success and are
rewarded with years of service from your equipment
purchase.
Carefully examine your equipment upon receipt.
Report any damage immediately to the freight
carrier and register any claim. Should any material
or manufacturing defects be discovered, report your
findings to our service department along with the
model, serial number, and date of purchase. We want
to make sure that you are satisfied with the equipment.
As always, we welcome input on how our products can
be improved to serve you better.
Read and understand this manual before using your
equipment. Follow all safety instructions. Keep this
manual in an accessible at all times.
Information provided in this manual is current as of the
issue date. Imperial Systems, Inc. reserves the right to
make design changes without further notice or liability.
Equipment modifications from original design and
specifications are prohibited. Modifications may
compromise safe operation of the machine, subjecting
users to serious injury or death, and may void any
remaining warranty.
This Operator’s Manual does not replace, nor does its
use release the owner from observing all safety codes
and operating limitations, as well as any applicable
federal, state, provincial, or local regulations.
1.2 Serial Number
The serial number plate is located in the lower left
corner of the door below the CMAXX sticker.
For future reference, write your serial number in the
space below:
Model – Model of dust collector that you have. The
number in the model name represents the quantity of
filters in the unit.
Job Number – Sales order number that the unit was
sold under.
Serial Number – Serial number of the unit.
Date of Order – Date that the job was entered.
Customer – Customer that unit was sold to.
Filters - Part number for filters that were ordered with
the unit.
A.T.C. Ratio – Air to cloth ratio that the unit was
designed to operate at.
KST Value - KST Value is the explosive value of the
dust being collected. The higher the value the more
explosive the dust is.
Dust Type – Description of dust that collector was
designed to filter.
imperialsystemsinc.com
4
Imperial
Systems
Inc.
M E R C E R , P A , U S A
w w w . i m p e r i a l s y s t e m s i n c . c o m
8 0 0 . 9 1 8 . 3 0 1 3
O N LY F I LT E R S
N O N - F A C T O R Y F I LT E R S V O I D S W A R R A N T Y
M O D E L
J O B N O .
S E R I A L N O .
D A T E O F O R D E R
C U S T O M E R
F I LT E R S
D U S T T Y P E
K S T VA L U E
A .T. C . R A T I O
Summary of Contents for CMAXX
