18
Wirelessly Triggering Your Hot-Shoe Flash
1.
With the device turned off, connect the transmitter to
the camera (see setup instructions in “Connecting the
Transmitter to the Camera” on pg. 13).
2.
With the hot-shoe flash turned off, connect the flash to
the receiver. Tighten the flash’s locking lever to secure the
devices.
3.
Mount the connected receiver and flash to a light stand or
secure it into the desired position.
4.
Synchronize the channels on the transmitter and receiving
devicest.
5.
Switch on the receiver and flash devices.
6.
Press the on-camera shutter release button or the test
button on the transmitter to fire the flash.
Wirelessly Triggering Your Studio Flash
1.
With both devices turned off, connect and secure the
transmitter to your camera (see setup instructions in
“Connecting the Transmitter to the Camera” on pg. 13).
2.
With the studio flash turned off, connect the receiver to
the studio flash (see setup instructions in “Mounting the
Receiver to a Studio Flash” on pg. 15) using the included
cable.
