19
Wirelessly Triggering Your Studio Flash
3.
Synchronize the channels on the transmitter and receiver.
See channel selection instructions on page 12.
4.
Turn on the camera, transmitter, receiver, and studio flash.
5.
Press the shutter release button on the camera or the test
button on the transmitter to trigger the flash.
NOTE: A household male to 1/4” female adapter is available
separately.
Wake-Up Feature
Some devices will enter sleep mode after a period of inactivity. If the
flash has a wake-up function, the Impact PowerSlave system has an
easy-to-use function that wakes up the flash after it has entered sleep
mode.
To wake up a device, half-press the camera’s shutter release button.
TIP: If the flash does not have a wake-up function, the sleep mode
may have the option to be disabled. Refer to your flash’s manual for
instructions.
