16
Mounting the receiver to the Impact Quickbox
The following instructions are for mounting the PowerSlave receiver
to the Quickbox. For more information about Impact’s Quickbox and
the Speed Ring Flash Bracket, refer to the user manuals included with
those products.
Preparing the Speed Ring Flash Bracket
1.
Slightly loosen the bottom thumb screw.
2.
Hold the thumbscrew and the three washers in place while
unscrewing and removing the cold shoe from the bracket.
3.
Align the threaded socket of the receiver with the top of
the exposed screw and screw in the receiver until secure.
Tighten the locking wheel until it is secure.
