11
Battery Installation
Before You Begin
The Impact PowerSlave system transmitter requires one 23A 12-volt
alkaline battery (included). The receiver requires two AAA batteries
(included).
To install the batteries:
1.
Turn all devices off.
2.
Loosen the shoe locking wheel, and remove the battery
compartment door from the back of the unit.
3.
In each unit, insert the required batteries in the battery
compartment. Be sure they are installed using the correct
polarity as indicated inside the compartment.
4.
Replace the battery compartment doors.
To turn on the transmitter or receiver, move the On/Off switch to the On
position. Do the opposite to turn off the device.
