© Adam Equipment Company 2004
13
8.9
= Automatic Power Switch Off
The ADG balance includes an internal rechargeable battery. The typical
operation time using only the battery is 20 hours. The balance includes the
TIME function to turn the power off after 5 minutes if the balance is not being
used. This function can be disabled if the balance is powered from the main
power supply or if the disruption of the power might affect the weighing
procedure.
•
To set the parameter press the [Func] key to show “ ”.
•
Press [Print] to see the parameter.
•
Press [Print] to select either = 0 or = 1.
= 0 Automatic switch off is enabled.
= 1 Automatic switch off is disabled.
•
Press the [Func] key to return to weighing.
8.10
= Hold Maximum Value
When a weight is placed on the pan the display will hold the highest reading
until the operator presses the [Tare] key to reset the display to zero. This
function can be used at the same time as any of the weighing functions i.e.
Parts Counting, Percent, Newtons etc. When the function is enabled the display
will show a dash above the left digit.
•
To set the parameter press the [Func] key to show “
”.
•
Press [Print] to see the current parameter.
•
Press [Print] to select
= 0 or
= 1.
= 0 will disable the hold function and
= 1 will enable the same.
•
Press the [Func] key to return to weighing.
To exit this function press the [Func] key until
or any other weighing
function is displayed and then press [Tare].
