6
STEP 9
Note: Proceed carefully. When flipping the desk, do not roll it onto the edge with the controller.
STEP 10
INITIALIZE YOUR DESK
1. Plug in
power supply cable
.
2. Hold down
▼
button on hand
controller until desk lowers to its
lowest limit. Release.
3. Hold down
▼
button again for five
seconds. ‘000’ will display when
initialization is complete.
Your desk is assembled!
1
2 3
STEP 8
TIDY UP YOUR CORDS
1. Place the adhesive
cable management clips
on the underside of your desk.
2. Pass your cords through the clips to secure them in place.
TURN YOUR DESK UPRIGHT
This step requires two people.
Note: If you do not intend to use the ZipDesk smartphone app, you can remove the
bluetooth dongle
(pictured) and plug the hand controller cord directly into the
power control box, reducing standby power consumption from 60–80mW to 10mW.
