iMotion SW111, User Manual

Page: 102 / 313

iWaylink Inc.
102
Enter End
*/$%ENTR* *ZEND*
7-2-7 Coupon Gs1DataBar Output
When scanning the barcode data of UPC and GS1 Databar at the same time,
whether to only indicate the content of GS1 Databar
*JVD0*
Disable
*JVD1*
Enable
7-2-8 Extended Coupon Code
Use the following codes to enable or disable UPC-A and EAN-13with Extended
coupon code:
1. Off : When left on the default setting(Off), the scanner treats Coupon codes
and Extended Coupon Codes as single bar codes
2. Allow : If you scan the Allow Connection code, when the scanner sees the
coupon code and the extended coupon code in a single scan, it transmits
both as one symbology. Otherwise, it transmits the first coupon code it
reads
3. Require : If you scan the Require Concatenation code, the scanner must
see and read the coupon code and extended coupon code in a single read
to transmit the data. No data is output unless both codes are read
*IVC0*
Off
*IVC1*
Allow
*IVC2*
Require